John Wojnaroski wrote:
Hi Curt,
I don't have it running yet, just wondering; does the code contain any
logic to filter the chatter based on radio frequency/location?
Sitting on the ramp, tuned to ground control, you should not be
hearing calls to an ARTCC. If your practicing VFR patterns at your
local field, you should hear other VFR calls from the pattern, at
FL310 you should hear calls between the Center and other A/C under
positive control.
Perhaps some sort of ID tag(s) on the msg to specify type and other
charateristics and then set the ATC chatter filter based on selected
radio frequency and/or flight conditions.
Right now this is just dumb ear candy ... either always on or always
off. It makes sense to tie it to the actual tuned frequency, tie the
volume to the volume knob (which is modeled at least on the default
cessna) and do a few other fancy things. But that was beyond the scope
of my time available this past weekend.
Regards,
Curt.
--
Curtis Olson http://www.flightgear.org/~curt
HumanFIRST Program http://www.humanfirst.umn.edu/
FlightGear Project http://www.flightgear.org
Unique text: 2f585eeea02e2c79d7b1d8c4963bae2d
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel
