On Tue, 29 May 2007 22:49:44 +0200 alexis bory <[EMAIL PROTECTED]> wrote:
> syd & sandy a e'crit : > > Hi all , I would like to add a groundspeed property to the autopilot > > route manager ... the calculations are already done in the source > > code , I would just like to output that to a property for the Primus > > 1000 FMS mode.GPS has an indicated -groundspeed , but I would prefer > > to use the route-manager for this ... any objections /suggestions ? > > Why not in /velocities ? > > > (I used a Nasal to get a ground speed, I'll be happy to get ride of it :) > > Alexis Well , Ive thought of that too .researching these things leads me to believe that in real life (I could be wrong),groundspeed is calculated using a nav signal as a reference point , so it is only accurate if you are flying directly toward that point... But a /velocities/groundspeed could be used as a starting point ... -- syd & sandy <[EMAIL PROTECTED]> ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel