--- Robin van Steenbergen <[EMAIL PROTECTED]>
schrieb:

> Heiko Schulz schreef:
> > Hi,
> >
> > Still working on the 3D-cockpit but a first
> release I
> > can give this week!
> >
> > HHS
> Screenshots? Will that be an actual -300 cockpit
> (with EFIS and separate 
> engine gauges) instead of the current 'NG-like'
> cockpit gauges?
> 
> I do think there aren't enough decent airliners in
> the FG branch, which 
> may be putting off current MSFS users because of the
> lack of accurate 
> airliner sims (like the Level-D 767-300ER or PMDG
> 737-800). FG does 
> provide enough opportunities to do system simulation
> through Nasal 
> scripting, but the current panel engine is still
> somewhat limited in 
> doing vector ('glass') cockpits.


Hi

A screenshot here:
http://www.hoerbird.net/boeing737-300.3dcockpit1.jpg

I have still trouble with perfomance, but I  have a
too old pc anyway ...

That's why the developement is very slow and now cause
of looking for a new job I will not really have the
time to go one. So I will try this weekend to fix some
things and maybe let commit it.  I also changed the
exterior model - it has now the real dimensions of a
737-300.
I also changed the offset-position of the aircraft- it
matches now to the contact points. ( no floating above
ground!)

I also improved the AP with adding the Vertical Speed
Hold.

The Overhead Panel has to be fixed and finished, the
VOR-instrument has to be done and still a lot of other
things.

But the fdm of the 737 done here by Dave Culp is one
of the best we have, I was really surprised that it
can be flew exactly after the checklists and
procedures which can be found on several sites in the
web!

Thanks
David!

Hopefully I can do it this week...
Regards
HHS


      Machen Sie Yahoo! zu Ihrer Startseite. Los geht's: 
http://de.yahoo.com/set

-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Flightgear-devel mailing list
Flightgear-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/flightgear-devel

Reply via email to