On Wed, 2010-12-08 at 17:13 -0800, Hal V. Engel wrote: > I used 120Hz (this is the same as the freq. of the FDM) and it almost works. > But the problem is that on each run there is enough variation in the behavior > of the model that the control inputs eventually get out of sync with the > state > of the flight test and it ends up crashing. In fact it appears that things > like what view is being used affect how the aircraft behaves. > > I am doing spins during the flight and the exit state of the spin (direction, > > roll angle, speed and so on) appears to vary in each run and that is where I > run into the issue since the control inputs don't match the state of the > aircraft at that point.
Hm, you probably should make sure that you use the same weather settings for every run. At the moment the GIT version of FlightGear always enables METAR fetching for example. Thinking about it there can also be some influence from attached joysticks and perhaps the mouse.. Erik ------------------------------------------------------------------------------ This SF Dev2Dev email is sponsored by: WikiLeaks The End of the Free Internet http://p.sf.net/sfu/therealnews-com _______________________________________________ Flightgear-devel mailing list Flightgear-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/flightgear-devel