Hi Martin,
I just came back from work and did some quick tests on the new window
for FlightGearTools.
It is called "windows" and the last one.
As you already worked with FGTools this should be very familiar for you.
1. On the main page (you should see first) check "default start page" ->
"windows"
2. Select the "windows" page
3. Get the basefolder of FG (which version you might want to use is up
to you /0.9.8 or 0.9.9)
4. Click on build list under Aircraft
When finished select the aircraft you want to use
This aircraft list will be remembered by the program.
If you add a new aircraft or delete one, build a new list
You have to check "aircraft" if you want to use one of these aircrafts
5.If you want to start from an airport, check "airport (icao)" and type
icao code and if you want the airport-name, divided by a whitespace.
I.e. EDDW Bremen or EDDM München or KSFO San Fr.. or..
These airport names are remembered. The next step will be a reading from
the FG data, not yet implemented
If you want to start from the carrier, don't check "airport"
6.Check special Param if you want to add other FG parameter
Always remember that you divide several parameters by a whitespace.
(--xxxx=yyyy --aaaa=bbbb --cccc=dddd)
You may add as many parameter as you want.
7.You might edit the predefined parameter you see right to "run
FlightGear (w32)" or delete or add parameter in this line
8. If you want to see which parameter FGTools send to FlightGear and in
which format you might check "info" at the right bottom.
Then you'll get a message before FG is started. This is important if
anything runs wrong. You could see you misspellings :-)
9. When you are ready, click "Run FlightGear (W32)". As the box "Close
FGTools when executing .." is checked by default, FGTools will close
without any further action.
10. The parameter you type in are remembered by the program when you
start it the next time. Click the arrows at the right side of the boxes
to see what you have already.
You may download this special version from my homepage
http://home.arcor.de/vollnhals-bremen/Martin/FGT13.zip
It will be improved within the next week as we (you and I) do want to
run Atlas and Map from this new page.
But it may help you *now* to start FlightGear with commands you
otherwise had to type in at the windows command line :-(
Give feedback if anything does not work *and* also if it works (might be
off list).
Regards
Georg
_______________________________________________
Flightgear-users mailing list
[email protected]
http://mail.flightgear.org/mailman/listinfo/flightgear-users
2f585eeea02e2c79d7b1d8c4963bae2d
