|
Hi, I’m new to flow-tools. I’ve recently
installed it following the How-To for Flowtools with CUFlow and RRD. The
install seems fine, however, the graphed output shows no inbound traffic. I’ve
listed all my subnets in the cf file as specified in the how to. The
percentages given in the legend, however, do show that there is inbound traffic
(e.g. TCP 94% out, 40% in). Can anyone help me with this problem? I’ve
found posts with similar problems but not with the use of CUFlow. Secondly, I’ve realised that CUFlow is not
ideal for my purpose, since I’m particularly interested in a detailed
breakdown of the traffic flowing between subnets (we’re a carrier), as
well as to the Internet. Can anyone indicate what the best solution would be
(i.e. packages/perl modules to use..)? Thanks. Joe ------------------------------------------------
This
Email is confidential and intended solely for the use of the individual to whom
it is addressed. Any views or opinions represented are solely those of the
author and do not necessarily represent those of Datastream Ltd. If you are not
the intended recipient, be advised that you have received this e-mail in error
and that any use, dissemination, forwarding,printing or copying of this Email
is strictly prohibited. Please notify the sender immediately by e-mail if you
have received this e-mail by mistake or call +356 21482000 and delete this
e-mail from your system. E-mail transmission cannot be guaranteed to be secure
or free of errors as information could be intercepted, corrupted, lost,
destroyed, delayed or incomplete, and/or contain viruses. The sender therefore
does not accept liability for any errors or omissions in the contents of this message,
which arise as a result of Email Transmission. |
_______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
