[Flow-tools] howto aggregate prefixes?

[Lars Lystrup Christensen]

Hi there   I’ve got a huge amount of data I want to make some reports on.   Especially I want to be able to specify a range of IP addresses in CIDR notation and then get a report of that. I believe it has something to do with the filter-capability; however I would like some examples to review.   Also if someone could advice me on what I’m missing in the following config:   ip flow-export source Loopback0 ip flow-export version 5 peer-as bgp-nexthop ip flow-export destination xxx.xxx.xxx.xxx 9991 ip flow-aggregation cache as �export destination xxx.xxx.xxx.xxx 9991 �enabled ! ip flow-aggregation cache prefix �export destination xxx.xxx.xxx.xxx 9991 �enabled !   ______________________________________ Med venlig hilsen / Kind regards Lars Lystrup Christensen IP Operations Technician Danske Telecom A/S Lautrupsgade 9, 2 2100 K�benhavn � [EMAIL PROTECTED] +45 35 27 50 00 (Office) +45 35 27 50 50 (Fax) +45 35 27 50 23 (Direct) +45 40 60 55 23 (Mobile) www.dansketelecom.com  This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation.

_______________________________________________
Flow-tools mailing list
[EMAIL PROTECTED]
http://mailman.splintered.net/mailman/listinfo/flow-tools