I' trying to setup the next enviroment.
_________ _________
| HOST A | ================= | HOST B |
---------------- ----------------
Each HOST is on a different network.
HOST A = 10.0.1.0/24 network HOST B = 10.0.3.0/24 network
There is a ipip tun between both machines.
HOST A = eth0 // tun0 HOST B = eth0 // tun0
HOST A is getting Netflow traffic ussing the eth0 and has to send iit to HOST B
ussing the tunnel.
So in HOST A I run.
# flow-fanout 10.0.1.230//1010 -s 0/172.0.0.2/1010
where 10.0.1.230 is the IP address of the eth0 dev.
and 172.0.0.2 is the ip address of the other point in the tun0 dev.
and on the messages file I see this.
--------------- flow-fanout: send (j=0): Message too long. ---------------
I've tryed to use more than one destination and all the traffic that has to
go througt the tun dev is not send .. if the destination is reachable ussing the
lan device everithing is fine.
I've tryed also without the -s option . and in that case everything works fine.
I really need to spoof the Ipaddress .. and i've been googling for related information
but I don't find anything related with this bug..
Have you seen something similar, can you help me..
Thnks :)
-- Juan Jose Lopez Juarez [EMAIL PROTECTED]
_______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
