Configure the system to export the packets getting switched in hardware. What you have configured will only export traffic switched by the RP (MSFC) in software. Refer to:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/122sx/swcg/nde.htm
Ian
At 12:43 PM 5/10/2005 +0800, haina tang wrote:
Hi all, I met with a netflow problem.
I configured netflow on cisco cat6506 (IOS (tm) c6sup2_rp Software (c6sup2_rp-PSV-M), Version 12.2(18)SXD3)
The traffic on that device is about 100M. But when I monitor using flowscan, the traffic is only about 10k.
My netflow configuration is just: ip route-cache flow
Have you ever met with such problem?
yours sincerely haina tang _______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
_______________________________________________ Flow-tools mailing list [EMAIL PROTECTED] http://mailman.splintered.net/mailman/listinfo/flow-tools
