On 8.9.2005, at 20:18, Ross Wimmersberger wrote:
I tried to add some additional routers and so far am not having any
luck... First question, is there a way on the router to tell if it's
sending flows? Second, this is on a frame relay network, so the
routers
rtr#sh ip flow export
Flow export is enabled
Exporting flows to 1.2.3.4 (9995)
Exporting using source interface Loopback0
Version 5 flow records, peer-as
158086 flows exported in 6349 udp datagrams
0 flows failed due to lack of export packet
0 export packets were sent up to process level
0 export packets were dropped due to no fib
5 export packets were dropped due to adjacency issues
0 export packets were dropped due to fragmentation failures
0 export packets were dropped due to encapsulation fixup failures
0 export packets were dropped enqueuing for the RP
0 export packets were dropped due to IPC rate limiting
rtr#
rtr#clear ip flow stats
rtr#sh ip flow export
...
v.
_______________________________________________
Flow-tools mailing list
[EMAIL PROTECTED]
http://mailman.splintered.net/mailman/listinfo/flow-tools
