Hello, list.
I have some questions about flow-tools.
-. I have c6509-sup2 and there are lots of interfaces are connected.
2 port-channelled interfaces are connected with upstream ISP.
and 4 ports are connected with our 4 customers.
Then, "ip route-cache flow" config is required only at 2 upstream
interfaces or
all(2+4=6) interfaces?
-. I have monitored network traffic using flow-tools and works great.
But, currently, I can see graphs or logs only for total traffic.
Is there any available solution or method that I can see flow-tools
graph per interface(customer)?
ex) G0/1 : 10.0.1.0/24 (vlan10, A custtomer)
G0/2 : 10.0.2.0/24 (vlan20, B customer)
G0/3 : 10.0.3.0/24 (vlan30, C customer)
G0.4 : 10.0.4.0/24 (vlan40, D customer)
I would like to see each traffic for A, B, C and D customer.
Thanks for your time..
_________________________________________________________________
편리한 웹하드가 최대 1G 까지 무료!
http://im.msn.co.kr/new/function/function_02_11.asp
_______________________________________________
Flow-tools mailing list
[EMAIL PROTECTED]
http://mailman.splintered.net/mailman/listinfo/flow-tools
