As said by Tom, the old commands are deprecated and one should use the settings.
But for now the old command still work but probably will be removed. So it is not recommanded to use these. >So, the chorus.speed numbers are Hz? yes >And the chorus.depth numbers are ms? yes >Actually, the synth allows chorus.depth numbers only up to 21 (and I'm using >44100) Is that a glitch/problem?. Yes there is a mismatch between the old command and a the new one. The old command 'cho_set_depth' allows to use 46 ms (at sample rate = 44100). The new command 'set synth.chorus.depth' limit to 21. This is a bug in the upper limit of the setting. jjc > Message du 04/10/18 11:45 > De : "Ben Gonzales" > A : fluid-dev@nongnu.org > Copie à : > Objet : Re: [fluid-dev] V2 Chorus/reverb parameter ranges > >Thanks JJC. > > So, the chorus.speed numbers are Hz? I just tested the speed, and 0.29 is > indeed the lowest allowed. > > And the chorus.depth numbers are ms? Actually, the synth allows chorus.depth > numbers only up to 21 (and I'm using 44100). Is that a glitch/problem? > > Ben > > On 04/10/18 18:34, Ceresa Jean-Jacques wrote: > > Hi Ben > > >I couldn't find an updated man page, so I did some fiddling and came up with > >these ranges. > Chorus lower speed limit is 0.29Hz (not 0) and chorus max depth limit depends > of synth.sample-rate. For example with sample rate set to 44100 Hz, chorus > max depth is 46 ms. > Others range you stated are correct. > Also in my opinion, i never found that using chorus nr above 2 should give a > better sound. > Regards. > jjc > > Message du 04/10/18 01:07 > > De : "Ben Gonzales" > > A : fluid-dev@nongnu.org > > Copie à : > > Objet : [fluid-dev] V2 Chorus/reverb parameter ranges > > > > Version 2 has deprecated the old reverb/chorus settings I couldn't find an > > updated man page, so I did some fiddling and came up with these ranges. > > synth.reverb.room-size range 0, 1 synth.reverb.damp range 0, 1 > > synth.reverb.width range 0, 100 synth.reverb.level range 0, 1 > > synth.chorus.nr range 0, 99 synth.chorus.speed range 0, 5 > > synth.chorus.depth range 0, 21 synth.chorus.level range 0, 10 Are these > > correct? Any tips for the unwary? Ben > > _______________________________________________ fluid-dev mailing list > > fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev > > _______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev > _______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
_______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev
