Hi, I am using Fluidsynth library in my program (Petit_ami on sourceforge). It is working well, but my result is very low volume output. A search found many other references to low volume, and the standard answer I found was to turn up the gain on the command line version of fluidsynth (I believe -g or "gain" option). Of course that does not apply to users of fluidsynth as a library. I have had good luck finding various parameters via the settings call. The "synth.gain" parameter should do it: "The gain is applied to the final or master output of the synthesizer. It is set to a low value by default to avoid the saturation of the output when many notes are played." It is 0-10, but is defaulted to 0.2. However, changing this parameter had no effect on the output volume, I tried all the way up to 10. Other details: I am using alsa device. The device it is using (by examining "audio.alsa.device") shows as "default". Any help appreciated. Scott A. Franco San Jose, CA
_______________________________________________ fluid-dev mailing list fluid-dev@nongnu.org https://lists.nongnu.org/mailman/listinfo/fluid-dev