OK, when I looked and found out that it was only the one lay-out that became affected, and given what you said below, I went back and corrected the 45 fields out of the 135.
Silly me... thinking I¹d back it up as soon as I finished designing it. HA. NOW backed up! During the design is likely one of the most important times to back up isn¹t it. Thanks. Jackie on 1/11/08 4:06 PM, Steve Bennett at [EMAIL PROTECTED] wrote: > Jackie, > > If you have a backup copy of your file you could copy and paste the > old layout over the modified one and make your changes from there. > > You did make a recent backup! > > Steve > > > On Jan 11, 2008, at 1:50 PM, J. wrote: > >> > On a db I¹d just recently designed, I realized that I needed to >> > make some of the fields ³select entire field upon entry². Well, I >> > just made the mistake of doing a ³select all² and under the ³Field >> > Format² selection, selected that option - ³select entire field upon >> > entry². >> > Bad mistake! Now the menu selections from one of my fields is >> > showing up in ALL the fields! >> > I didn¹t undo soon enough (I¹d tried to insert text into another >> > box first), so it will only undo that last thing. >> > >> > Is there a way to undo what I¹ve done without, in the layout mode, >> > going into each and every field? >> > I¹m not going to touch it til I hear from one of you, so that I >> > don¹t bury myself deeper! >> > >> > Jackie >> > >> >
