thanks a lot It works jf ----- Original Message ----- From: "Andreas L. Delmelle" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, May 12, 2004 8:36 PM Subject: RE: How can I specify the value of the tabulation add after the end of fo:list-item-label by body-start() function?
> > -----Original Message----- > > From: Selber Jean-François [mailto:[EMAIL PROTECTED] > > > > I try it > > It doesn't work with fop 0.20.5 > > > > Hi, > > Provisional-label-separation is, well, 'provisional' and as such, by itself, > it will not suffice to achieve the effect you're after. > > >From the spec 7.28.3: > > "Specifies the provisional distance between the end of the list-item-label > and the start of the list-item-body. The value is not directly used during > formatting, but is used in the computation of the value of the label-end > function. > > label-end() = width of the content-rectangle of the reference-area into > which the list-block is placed - > (the value of the provisional-distance-between-starts > + the value of the start-indent > + start-intrusion-adjustment > - the value of the provisional-label-separation) of the closest ancestor > fo:list-block." > > So, say the area enclosing the list-block in question is 160mm wide, and you > leave all the others (except provisional-label-separation) at their > defaults, the calculation would become: > > label-end() = 160mm - (8.5mm + 0mm + 0mm(?) - 3mm) > ^^^^^ > Yes, the initial value for provisional-distance-between-starts is 24pt > (0.33inch or roughly 8.5mm) > > Would this happen to be the size of the space you currently get? > > The body-start() function also uses provisional-distance-between-starts: > > "body-start() = the value of the start-indent > + start-intrusion-adjustment > + the value of the provisional-distance-between-starts > of the closest ancestor fo:list-block." > > > HTH! > > Greetz, > > Andreas > > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
