Hi Alexander,
after find an machine which seems installed with configure in the past,
then i re compile it, got error after installed m4 sudo ./configure ABI=64sudo
make
config.status: creating Makefileconfig.status: creating
extern/Makefileconfig.status: creating config.h( cd
bin/x86_64-unknown-linux-gnu-gcc-default64/extern ; make
TARGET='x86_64-unknown-linux-gnu' BASECC='gcc' ABI='64' ABI_CFLAGS='-m64'
CC='gcc' GMP_VER='5.0.5' MAKE_GMP='gmp' CONFIGNAME='default64' )make[1]:
Entering directory
`/usr/local/lib/gap4r5/bin/x86_64-unknown-linux-gnu-gcc-default64/extern'
Building GMP. Logging to
bin/x86_64-unknown-linux-gnu-gcc-default64/extern/gmp-5.0.5/build_log. Please
wait...
Installing GMP in bin/x86_64-unknown-linux-gnu-gcc-default64/extern/gmp-5.0.5/.
Logging to
bin/x86_64-unknown-linux-gnu-gcc-default64/extern/gmp-5.0.5/build_log. Please
wait...
make[1]: *** [gmp] Error 2make[1]: Leaving directory
`/usr/local/lib/gap4r5/bin/x86_64-unknown-linux-gnu-gcc-default64/extern'make:
*** [extern] Error 2mmartin@ubuntu:/usr/local/lib/gap4r5$
Regards,
Martin
> From: tesl...@hotmail.com
> To: al...@mcs.st-andrews.ac.uk
> Date: Thu, 25 Sep 2014 15:20:57 +0800
> CC: fo...@gap-system.org
> Subject: Re: [GAP Forum] how many memory needed to run a full combination of
> matrix with element 0 and 1
>
> Hi Alexander,
> out of memory, how to install 64 bit version of gap system
> i remembered i installed rsync binary installer in the past. when i search
> download, i can not find 64 bit.
>
> LoadPackage("singular");onelist := Tuples([0,1,0,1,0,1],3);onelist2 :=
> [];Append( onelist2, onelist );Append( onelist2, onelist );Append( onelist2,
> onelist );matrixlist := Tuples(onelist2,3);matrixlist2 := [];Append(
> matrixlist2, matrixlist );Append( matrixlist2, matrixlist );Append(
> matrixlist2, matrixlist );ideallist := Tuples(matrixlist2,3);gap> ideallist
> := Tuples(matrixlist2,3);Error, exceeded the permitted memory (`-o' command
> line option) in tup[i] := l; called from TuplesK( set, k, [ ], 1 ) called
> from<function "Tuples">( <arguments> ) called from read-eval loop at line 67
> of *stdin*you can 'return;'
> Regards,
> Martin
>
>
>
> > Subject: Re: [GAP Forum] how many memory needed to run a full combination
> > of matrix with element 0 and 1
> > From: al...@mcs.st-andrews.ac.uk
> > Date: Wed, 24 Sep 2014 22:08:32 +0100
> > CC: fo...@gap-system.org
> > To: tesl...@hotmail.com
> >
> > P.S. Please also note that these two commands return the same output:
> >
> > gap> Tuples([0,1],4);
> > [ [ 0, 0, 0, 0 ], [ 0, 0, 0, 1 ], [ 0, 0, 1, 0 ], [ 0, 0, 1, 1 ],
> > [ 0, 1, 0, 0 ], [ 0, 1, 0, 1 ], [ 0, 1, 1, 0 ], [ 0, 1, 1, 1 ],
> > [ 1, 0, 0, 0 ], [ 1, 0, 0, 1 ], [ 1, 0, 1, 0 ], [ 1, 0, 1, 1 ],
> > [ 1, 1, 0, 0 ], [ 1, 1, 0, 1 ], [ 1, 1, 1, 0 ], [ 1, 1, 1, 1 ] ]
> > gap> Tuples([0,1,0,1,0,1,0,1],4);
> > [ [ 0, 0, 0, 0 ], [ 0, 0, 0, 1 ], [ 0, 0, 1, 0 ], [ 0, 0, 1, 1 ],
> > [ 0, 1, 0, 0 ], [ 0, 1, 0, 1 ], [ 0, 1, 1, 0 ], [ 0, 1, 1, 1 ],
> > [ 1, 0, 0, 0 ], [ 1, 0, 0, 1 ], [ 1, 0, 1, 0 ], [ 1, 0, 1, 1 ],
> > [ 1, 1, 0, 0 ], [ 1, 1, 0, 1 ], [ 1, 1, 1, 0 ], [ 1, 1, 1, 1 ] ]
> >
> > so you either may specify a set of values, or you may have in mind
> > something different.
> >
> > BW,
> > Alexander
> >
> >
> >
> >
> > On 24 Sep 2014, at 18:06, Lee Martin CCNP <tesl...@hotmail.com> wrote:
> >
> > > Hi
> > > how many memory needed to run the code below?
> > > do gap system have memory limit when run the code below ?
> > > since got out of memory in maple, i try full combination in gap system in
> > > 32bit virtual machine
> > > my notebook has 8GB ram and assign 2 GB to 4 GB ram for virtual machine
> > > then i know that 64bit do not have memory limit, then i plan and wait to
> > > buy a intel 61 cores for more than 128GB ram in future if i meet memory
> > > limit tomorrow.
> > > it is just full combination of ideals, i can not imagine how much memory
> > > need for full combination of modules and whether can run with 61 cores
> > > onelist := Tuples([0,1,0,1,0,1],3);onelist2 := [];Append( onelist2,
> > > onelist );Append( onelist2, onelist );Append( onelist2, onelist
> > > );matrixlist := Tuples(onelist2,3);
> > > ideallist2 := [];Append( ideallist2, matrixlist );Append( ideallist2,
> > > matrixlist );Append( ideallist2, matrixlist );ideallist :=
> > > Tuples(ideallist2,3);
> > > ___________________________________________actually i expect to try
> > > onelist := Tuples([0,1,0,1,0,1,0,1],4);onelist :=
> > > Tuples([0,1,0,1,0,1,0,1,0,1],5);
> > > onelist := Tuples([0,1,2,0,1,2,0,1,2],3);onelist :=
> > > Tuples([0,1,2,0,1,2,0,1,2,0,1,2],4);onelist :=
> > > Tuples([0,1,2,0,1,2,0,1,2,0,1,2,0,1,2],5);
> > > for above code too
> > > Regards,
> > > Martin
> > >
> > > _______________________________________________
> > > Forum mailing list
> > > Forum@mail.gap-system.org
> > > http://mail.gap-system.org/mailman/listinfo/forum
> >
>
> _______________________________________________
> Forum mailing list
> Forum@mail.gap-system.org
> http://mail.gap-system.org/mailman/listinfo/forum
_______________________________________________
Forum mailing list
Forum@mail.gap-system.org
http://mail.gap-system.org/mailman/listinfo/forum
