I don't know whether there is a standard definition, but I
would regard it as a hole that couldn't be made reliably
using a standard drill-then-plate process.
i.e. smaller than about 0.25mm finished hole size in a
0.5mm diameter land.
John Haddy
> -----Original Message-----
> From: Brian Guralnick [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 15 May 2001 8:05 AM
> To: Protel EDA Forum
> Subject: [PEDA] What size is a micro VIA
>
>
> Hi all,
>
> What diameter is considered a micro-Via?
>
> Thanks,
> _____________
> Brian Guralnick
>
>
>
>
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
