i think you can subtract the number holes from the number of pads+vias
that info is available somewhere like board info
i do this for smd pad count for test fixtures
Dennis Saputelli
Edi Im Hof wrote:
>
> Hi all
>
> I try to find out how many SMD-pad I have in my design.
>
> I generated a report (Reports|Board Information|Report) for the primitivs
> "Pad solder mask", "Pad paste mask" and "Via solder mask"
>
> The report:
>
> Specifications For 10341500.pcb
> On 22-May-2001 at 16:41:59
>
> Pad Solder Mask Count
> ----------------------------------
> 0.1016mm (4mil) 1307
> ----------------------------------
> Total 1307
>
> Pad Paste Mask Count
> ----------------------------------
> 0mm (0mil) 1307
> ----------------------------------
> Total 1307
>
> Via Solder Mask Count
> ----------------------------------
> 0.1016mm (4mil) 342
> ----------------------------------
> Total 342
>
> Now am I a bit puzzled. Protel counts the same amount of Pad Solder and
> Past Mask, but I have a mixed SMD/TH board. I assumed the Paste Mask count
> should be smaller as only SMD pad are having paste maks openings????
>
> Anybody an idea what's wrong?
>
> I need the Paste Mask cout for an offer for an Laser Stencil
> (www.schablone.de).
>
> TIA
> Edi
--
___________________________________________________________________________
www.integratedcontrolsinc.com Integrated Controls, Inc.
tel: 415-647-0480 2851 21st Street
fax: 415-647-3003 San Francisco, CA 94110
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
