I do a lot of work for a Japanese company. When they require a slot they ask
me to place pads in series, each a half overlap over the other. These slots
are never very long maybe requiring 5-10 pads. I believe this method works
for the fabricator, and it saves me the time of creating a detail.
Hope that helps,
Bob Jones
Digitized Technologies
2 Summit Road
P.O.Box 7284
Prospect, CT. 06712-1541
Tel: 203-758-6312
Fax: 203-758-3338
email: [EMAIL PROTECTED]
[EMAIL PROTECTED]
----- Original Message -----
From: "Rob Porter" <[EMAIL PROTECTED]>
To: "Protel EDA Forum" <[EMAIL PROTECTED]>
Sent: Wednesday, June 27, 2001 6:44 AM
Subject: [PEDA] Pad With Slotted Hole
> Hi All,
>
> I am laying out a board with a section that needs to be screened off and
was
> hoping to have tabs on the screen to solder into the PCB.
> My problem is, I need to create pads on the PCB that have slotted holes
> not the standard round hole ).
>
> Any help would be much apreciated.
>
> Thanks,
> Rob.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
