List friends, I am studing how to post-process Kinematic Stop&Go with rtklib_2.4.1 rnx2rtk under GNU/Linux.
I would like to receive comments and directions. I am a GNU/Linux user and I like CLI and the *NIX way of doing things. I wrote some shell scripts to process and to get the Rover stop end moving from rinex. The ( raw and rinex ) from an Stop&Go survey at 2012-06-22 are here: http://gpl2.com.br/stopgo The base station, MR02, was ocupied by an Trimble 5700 L1+L2 receiver. The rover was performed by an Ashtech Z-Xtreme L1+L2 receiver. The rover should stays almost 10 minutes on an known point, at start and at the end of the session and collected 10 epochs every stop at 1 second data rate. Unfortunately the field operator did not do that. There are several static points, occupied later on by the rover ( check ). # There is an C source code fragment showing the Ashtech raw data structure. "benstrct.lst" I would wonder if one know about Ashtech DBEN RTK corrections format. thank you in advanced for your help, best regards, julio menezes PS: a) unzip the data file psan_2012-08-22.zip in /tmp under GNU/Linux. b) I have other better campain data, 174 is the worst one. c) I have used PostGIS to process the rnx2rtk positions output _______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS