Hello, I have turned on both RXM-RAW and RXM-SFRB messages, and using RTKLib I can successfully get a SINGLE lock. So far I can't get my base station to work in conjunction to get a real rtk fix.
I'm using the Novatel OEMV-3. I found that it outputs RTCM messages, so I tried enabling the RTCM3 messages 1002, 1006, 1007, 1008, and 1019, however when I try connecting to the Novatel as both a 'base station' and then later as 'correction', it does not ever find a fix beyond "SINGLE". I did previously try enabling the OEMV messages like RAWEPHEM that were listed as supported, but that didn't seem to work either. I have also input the base station position information in the options. Any help with further configuration would be greatly appreciated. I suspect that I might just have the wrong messages setup or have something wrong with my connection settings, but I am really not too sure at the moment... -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKLib-with-Novatel-OEM-device-as-base-tp7572967p7572970.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS