Again, many thanks to Dan for his explanation.
Now that I see the INI file in use (and know to remove it from memory
with a restart), much becomes clear when controlling different filter
types. But one thing remains odd to me, the intended use of the
*config file in all this.
If seems to overlap with the *.ini file in many ways and saves very
similar information and settings strings., to wit, all the file paths
seem to be saved in both places.
Clearly the *config file is intended to have all the navigation filter
settings, but that too is found in the *.in file (ie mode etc. )
If there any item that is in fact set on one and not the other? When
does one use each? I do not see anything in the manual about this.
On 11/15/2014 8:22 AM, David Kelley wrote:
Thanks Dan
When I cut that part of the *.ini file off, AND restart RTKnavi it
then loses all the data. Yeah!
The cold restart is needed as it seems to keep the past ephemeris in
memory as well, and it will not re-read the *.ini file until that
moment in time.
- cut - - cut -
--
Regards,
David Kelley
ITS Programs Manager
SubCarrier Systems Corp. (SCSC)
1833 East Foothill Blvd. Glendora, CA USA 91741
626-485-7528 (Cell) 888-950-8747 (Main)
626-513-7715 (Office) 888-613-0757 (Fax)
<davidkel...@itsware.net>
_______________________________________________
This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
