Hi, I have 2 ublox NEO-6P adaptors capable of outputting RAW Data, and I was trying to use the following the configuration: - One ublox connected to an android phone running RTKGPS+ (the NTRIP Caster branch) and outputting one solution as a NTRIP Server. - The other ublox connected to a Laptop running RTKLIB, and using the rover input as the Serial ublox and the Base Input as the NTRIP Client with format RTCM3.
The phone is able to get a Single Solution and all the status icon are green/blinking. In the laptop, the rover part is able to get a single solution and shows the satellites. The NTRIP Client (Base Input) says its connected (and the status icons are green) but it doesn't show the satellites, and if I try the Kinematic mode it always go back to Single. I'm new to the rtklib so I don't know if what I'trying to do is possible. Any advice? -- View this message in context: http://open-source-gps-related-discussion-and-support.1099874.n2.nabble.com/Using-RTKGPS-as-a-server-tp7573380.html Sent from the Open Source GPS-related discussion and support mailing list archive at Nabble.com. _______________________________________________ This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list. Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your subscription For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS