22.03.2016 - 11:45 - arwooldri...@googlemail.com:
Hi, try the start-up command files in the data folder of rtk2.4.3b8.
Thank you. I check and I have this commands:
ubx_m8t_bds_raw_1hz.cmd
ubx_m8t_bds_raw_5hz.cmd
ubx_m8t_glo_raw_1hz.cmd
ubx_m8t_glo_raw_5hz.cmd
ubx_raw_1hz.cmd
ubx_raw_5hz.cmd
ubx_raw_10hz.cmd
What I must use for gps+glo? I have 1s correction from station, so it is
better to use 1hz or 5hz (or 10)?
Thank you
Damjan
if they don't work, set up m8t in ucenter and save to flash.
in options/ position/base position, set to rtcm antenna position.
Regards Anthony
Sent from my HTC
----- Reply message -----
From: "Damjan Gerl" <dam...@damjan.net>
To: <foss-gps@lists.osgeo.org>
Subject: [FOSS-GPS] uBlox NEO-M8T and RTKlib
Date: Mon, Mar 21, 2016 21:27
Hi to all!
I'm new here, so I ask if there is someone that can help on configuring
a M8T module (what string is needed?) to work with RTKlib? And how to
configure RTKlib to deal with that module. Or maybe you can direct me to
some webpages/guides where I can find some help?
I have a Neo M8T module with fw 2.30 and try to use rtklib v2.4.3b8. I
have a d-gps station 10 km away from my location and want to use the
data from this station to correct the data from uBlox module (in
real-time and/or post-process)...
Thank you in advace
Damjan G.
_______________________________________________
This message is sent to you from FOSS-GPS@lists.osgeo.org mailing list.
Visit http://lists.osgeo.org/mailman/listinfo/foss-gps to manage your
subscription
For more information, check http://wiki.osgeo.org/wiki/FOSS-GPS
