We experienced an issue when long config files were pasted directly or indirectly (via console server) onto a MLX. We did the following: The same config was cut and pasted to the Foundry NetIron MLX via a console server and then later directly to the console port. The config in question was a long MPLS IP/BGP config. The switch can't keep up with the commands and somehow the text gets garbled. What was worse was that some of the garbled text got interpretted as commands by the switch. We tried a variety of flow control settings: none, hardware and software. Hardware doesn't seem to work at all. None and software work but both produce the same broken results. There seems to be no solution to this. It is believed that this issue is due to a limited buffer on the console port. Don't risk it, TFTP it! James Piper.
This e-mail and any attachments may contain confidential information that is intended solely for the use of the intended recipient and may be subject to copyright. If you receive this e-mail in error, please notify the sender immediately and delete the e-mail and its attachments from your system. You must not disclose, copy or use any part of this e-mail if you are not the intended recipient. Any opinion expressed in this e-mail and any attachments is not an opinion of RailCorp unless stated or apparent from its content. RailCorp is not responsible for any unauthorised alterations to this e-mail or any attachments. RailCorp will not incur any liability resulting directly or indirectly as a result of the recipient accessing any of the attached files that may contain a virus. -------------- next part -------------- An HTML attachment was scrubbed... URL: https://puck.nether.net/pipermail/foundry-nsp/attachments/20070604/b5f30d88/attachment.html
