cheers guys .. I need to learn to read properly ;)

________________________________

From: [EMAIL PROTECTED]
[mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Charley Kline
Sent: 25 June 2007 18:01
To: Umar Ahmed
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] Secondary IP addressing on VE interface doesnt
work!!!!!!



        Hello - I am trying to add a secondary IP address to a VE
interface configured as such :

         

        !
        vlan 30
         tagged ethe 1/1
         router-interface ve 30
        !
        interface ve 30
         ip address 213.213.213.1/24
        !

         

        No I go and try to add a secondary address :

         

        ip <mailto:SSH at vanc-uk-lo-gwp-01-fb-cs-02(config-vif-30)%23ip>
add 13.213.213.1 255.255.255.0 secondary

         

        and get the following error -

        IP/Port: Errno(11) Assign primary ip address on specified subnet
first

         

        I already have a primary address on the interface... so why wont
it accept this ? Appologies if I'm having a blonde moment.. any ideas ??



On a Foundry the term "secondary ip address" refers to a second IP
address on the SAME SUBNET as the primary address. Very different from
the Cisco definition.

To put a second IP on a different subnet, simply specify another "ip
address" clause without the "secondary" keyword, and it should work
fine.

/cvk


**********************************************************************
Any opinions expressed in the email are those of the individual and not 
necessarily the company. This email and any files transmitted with it are 
confidential and solely for the use of the intended recipient.  If you are not 
the intended recipient or the person responsible for delivering it to the 
intended recipient, be advised that you have received this email in error and 
that any dissemination, distribution, copying or use is strictly prohibited.

If you have received this email in error, or if you are concerned with the 
content of this email please e-mail to: e-security.support at vanco.info

The contents of an attachment to this e-mail may contain software viruses which 
could damage your own computer system. While the sender has taken every 
reasonable precaution to minimise this risk, we cannot accept liability for any 
damage which you sustain as a result of software viruses. You should carry out 
your own virus checks before opening any attachments to this e-mail. 

Vanco UK Ltd Registered in England No: 2296733 Registered Office: John Busch 
House, 277 London Road, Isleworth, Middlesex TW7 5AX

Please consider the environment before printing this e-mail
**********************************************************************

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
https://puck.nether.net/pipermail/foundry-nsp/attachments/20070625/2c064cc7/attachment-0001.html
 

Reply via email to