Hello, We recently aquired some Bigiron 4000 Jetcore routers to replace our ironcores due to CAM running out on the L3 level. To monitor CAM usage I'm now trying to read out the stats of the CAM tables through SNMP, but I'm not having much luck. I've been mailing with tech support too, they've been very supportive on finding why this doesn't work, but they can't find a reason on why I can't read out the OID's on our new routers.
The management blades we're using are J-BxGC16 blades (the 8-port mini gbic blades) All I keep getting is: [jeroenwu at linux_jeroen jeroenwu]$ snmpwalk -v 2c -m foundry/B2R08001a-MIB.txt -c public 10.100.100.125 .1.3.6.1.4.1.1991.1.1.2.12.2 FOUNDRY-SN-AGENT-MIB::snCAMIpStatTable FOUNDRY-SN-AGENT-MIB::snCAMIpStatTable = No Such Object available on this agent at this OID This is very consystent, on all three (same hardware) Bigirons this doesn't work nor does it on two older ironcore Bigirons that have a M4RZG management blade (The one with no ports, just 2 flash slots). But it DOES work on two other ironcore management blades I have (M4R4G, the one with 8 Gbic slots): [jeroenwu at linux_jeroen jeroenwu# snmpwalk -v 2c -m mib/B2R08001a-MIB.txt -c public 10.100.100.125 .1.3.6.1.4.1.1991.1.1.2.12.2 FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.1 = Gauge32: 1 FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.2 = Gauge32: 1 FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.1.3 = Gauge32: 1 FOUNDRY-SN-AGENT-MIB::snCAMIpStatIfIndex.2.1 = Gauge32: 2 etc.. So I'm a bit puzzled here on why this won't work on the others, any ideas ? Met vriendelijke groet, Jeroen Wunnink, EasyHosting B.V. Systeembeheerder systeembeheer at easyhosting.nl telefoon:+31 (035) 6285455 Postbus 48 fax: +31 (035) 6838242 3755 ZG Eemnes http://www.easyhosting.nl http://www.easycolocate.nl
