If I understand correctly you have only LERs and no LSRs? In our network we use all our MLX as LER and LSR without any problems - we also use a the same ring topology you suggested. The main thing to note is that you can't run MPLS network facing interfaces on VLAN/VEs as with your existing l2 ring. You need separate physical interfaces east-west on your ring just for IP/MPLS.
-- Patrick Cole <[EMAIL PROTECTED]> Senior Network Engineer TransACT Telephone: 02 6229 8115 Facsimile: 02 6229 8077 Mobile: 0410 626 630 PO Box 1006 Civic Square ACT 2608 www.transact.com.au -----Original Message----- From: [EMAIL PROTECTED] on behalf of Lazuardi Nasution Sent: Thu 10/9/2008 8:22 AM To: [email protected] Subject: [f-nsp] MPLS without P Router Hi, Anyone has experience with deploying MPLS but without putting any Provider (P) Router ? Let assume that there are only small numbers of NetIron MLX/XMR Routers act as Provider Edge (PE) Router and which are connected as a L2 Ring. Best regards, _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
