Second set of ports (port 5-8) on slot 1 looks slightly loaded but
nothing major, if you see the counter with:
L3 4096 - 32767 (0x01000 - 0x07fff), free 13870 (0x0362e)
Getting a really low free value, you might want to consider
repartitioning the cam partitions with a higher l3 usage
I gave some more detailed tips on July 15th, might want to go over the
mailing list archive (subject was 'Bigiron 4k with jetcore')
Bardo Cornelissen wrote:
Hi Jeroen,
I'm going to watch that ip cache, I see it's little above 100k now so I
assume it could grow above de default 140k and that would explain and we
should be able to solve this. Many thanks already!
I'm not sure how to look at this cam-partition, can you tell if anything
looks like an issue or exhausted here:
#sh cam-part det
==== SLOT 1 CAM PARTITION ====
IGC: 0 (0x00)
Number of CAM devices per IGC: 1
Number of hw entries per CAM: 0x08000
Total size of CAM = 2Mbits
complete CAM index range per IGC:
(sw) 1 - 49151 (1 - 0x0bfff), total entries: 49151 (0x0bfff)
(hw) 0 - 32767 (0 - 0x07fff), total entries: 32768 (0x08000)
Percentage of CAM hardware entries for each partition:
Layer3 = 16384 (1Mbits) (50%)
Level3 = 1023 (0.062438Mbits) (3.121948%)
Level2 = 1024 (0.0625Mbits) (3.125%)
Layer2 = 8192 (0.5Mbits) (25%)
Layer4 = 8192 (0.5Mbits) (25%)
Layer 3 sw index range:
L3 L3 1 - 2047 (0x00001 - 0x007ff), free 2021 (0x007e5)
L3 L2 2048 - 4095 (0x00800 - 0x00fff), free 1803 (0x0070b)
L3 4096 - 32767 (0x01000 - 0x07fff), free 23357 (0x05b3d)
layer 3 hw index range (inversely mapped):
16383 - 0 (0x03fff - 0x00000)
L2 index range:
(sw) 32768 - 40959 (0x08000 - 0x09fff), free 7806 (0x01e7e)
(hw) 16384 - 24575 (0x04000 - 0x05fff)
L4 pool 3 index range:
(sw) 40960 - 43519 (0x0a000 - 0x0a9ff), free 2560 (0x00a00)
(hw) 24576 - 27135 (0x06000 - 0x069ff)
L4 pool 2 index range:
(sw) 43520 - 46079 (0x0aa00 - 0x0b3ff), free 2560 (0x00a00)
(hw) 27136 - 29695 (0x06a00 - 0x073ff)
L4 pool 1 index range:
(sw) 46080 - 48639 (0x0b400 - 0x0bdff), free 2560 (0x00a00)
(hw) 29696 - 32255 (0x07400 - 0x07dff)
L4 pool 0 index range:
(sw) 48640 - 49151 (0x0be00 - 0x0bfff), free 504 (0x001f8)
(hw) 32256 - 32767 (0x07e00 - 0x07fff)
IGC: 1 (0x01)
Number of CAM devices per IGC: 1
Number of hw entries per CAM: 0x08000
Total size of CAM = 2Mbits
complete CAM index range per IGC:
(sw) 1 - 49151 (1 - 0x0bfff), total entries: 49151 (0x0bfff)
(hw) 0 - 32767 (0 - 0x07fff), total entries: 32768 (0x08000)
Percentage of CAM hardware entries for each partition:
Layer3 = 16384 (1Mbits) (50%)
Level3 = 1023 (0.062438Mbits) (3.121948%)
Level2 = 1024 (0.0625Mbits) (3.125%)
Layer2 = 8192 (0.5Mbits) (25%)
Layer4 = 8192 (0.5Mbits) (25%)
Layer 3 sw index range:
L3 L3 1 - 2047 (0x00001 - 0x007ff), free 1951 (0x0079f)
L3 L2 2048 - 4095 (0x00800 - 0x00fff), free 1100 (0x0044c)
L3 4096 - 32767 (0x01000 - 0x07fff), free 13870 (0x0362e)
layer 3 hw index range (inversely mapped):
16383 - 0 (0x03fff - 0x00000)
L2 index range:
(sw) 32768 - 40959 (0x08000 - 0x09fff), free 7878 (0x01ec6)
(hw) 16384 - 24575 (0x04000 - 0x05fff)
L4 pool 3 index range:
(sw) 40960 - 43519 (0x0a000 - 0x0a9ff), free 2560 (0x00a00)
(hw) 24576 - 27135 (0x06000 - 0x069ff)
L4 pool 2 index range:
(sw) 43520 - 46079 (0x0aa00 - 0x0b3ff), free 2560 (0x00a00)
(hw) 27136 - 29695 (0x06a00 - 0x073ff)
L4 pool 1 index range:
(sw) 46080 - 48639 (0x0b400 - 0x0bdff), free 2560 (0x00a00)
(hw) 29696 - 32255 (0x07400 - 0x07dff)
L4 pool 0 index range:
(sw) 48640 - 49151 (0x0be00 - 0x0bfff), free 504 (0x001f8)
(hw) 32256 - 32767 (0x07e00 - 0x07fff)
Kind regards,
Bardo Cornelissen.
Caveo Internet BV
-----Oorspronkelijk bericht-----
Van: Jeroen Wunnink [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 15 oktober 2008 12:32
Aan: Bardo Cornelissen
CC: [email protected]
Onderwerp: Re: [f-nsp] Odd CPU spikes on Jetcore BI4K, IP level
Hi Bardo,
Except for the CAM usage, also look on how saturated your IP cache is.
'sh ip cache' and look at the top at the total number of cache entries.
The default max is 140000, if it exceeds this maximum it'll start
throwing packets over the CPU, if it's at or near it's max, increase it
with 'system-max ip cache 400000' (reload required)
Bardo Cornelissen wrote:
Hi folks,
I'm facing an odd issue causing high CPU load on a Jetcore BI4K, with
for
what seems to be caused in a ip transit uplink.
We are running BGP on multiple jetcore BigIrons. Now there are 3
border
routers which each have an ip transit uplink. After some time (a day
or
sometimes more like a week) we see a high CPU load and it doesn't
stop until
we shutdown the BGP session with one of these carriers. So far we
have seen
2 crashes which may have been caused by this.
So we moved that carrier to a different router (same model), replaced
the
used SFP, upgraded the software on the router but nothing solves the
problem. Also our carrier relocated the port to a complete different
switch
and router, but still no luck. My carrier double checked everything
over and
over and with their reputation it's most unlikely they would be
failing
here.
Now the load is on IP level when issuing a 'sh proc cpu' command and
NOT on
the BGP level.
I hope someone somehow has ever seen a situation alike and found the
issue,
or maybe has some recommendations on how to debug this. Maybe someone
knows
any additional configuration that may help me out here.
The concerned config is:
!
vlan 20 name TRANSIT-BGP by port
untagged ethe 1/1
router-interface ve 20
!
interface ethernet 1/1
route-only
no spanning-tree
sflow forwarding
!
interface ve 20
ip address ???.???.???.??? 255.255.255.252
no ip redirect
ip arp-age 120
!
Thanks in advance for any help and efforts!
Kind regards,
Bardo Cornelissen.
Caveo Internet BV
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[EMAIL PROTECTED]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
--
Met vriendelijke groet,
Jeroen Wunnink,
EasyHosting B.V. Systeembeheerder
[EMAIL PROTECTED]
telefoon:+31 (035) 6285455 Postbus 48
fax: +31 (035) 6838242 3755 ZG Eemnes
http://www.easyhosting.nl
http://www.easycolocate.nl
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
