Hi, Yes. The traffic is routed via the ServerIron.
Thanks, Gaurav On Dec 22, 2008 9:09am, Wouter Prins <[email protected]> wrote:
Hi Guarav, Are the flows send from the server to the client going through the ServerIron somehow? 2008/12/22 Gaurav Sabharwal [email protected]>: > Some time ago, we had to enable source-nat on the LB. Now we are > trying to disable source-nat on the LB. When we disable the source-nat > on the load balancer, the VIP does not responds to the HTTP > connections. > > tcpdump on the server confirms that the packets are reaching the > server and are being sent back. However nothing reaches the web > browser. > > show version output: > > SW: Version 07.3.05T12 Copyright (c) 1996-2002 Foundry Networks, Inc. > Compiled on Jul 18 2002 at 17:20:18 labeled as SLB07305 > HW: ServerIron Switch, serial number 157b24 > 400 MHz Power PC processor 740 (revision 8) with 32756K bytes of DRAM > 8 100BaseT interfaces with Level 1 Transceiver LXT975 > 0 uplink interfaces > 256 KB PRAM and 8*2048 CAM entries for DMA 2, version 0807 > 128 KB boot flash memory > 4096 KB code flash memory > 2048 KB BRAM, BM version 02 > 128 KB QRAM > 512 KB SRAM > Octal System, Maximum Code Image Size Supported: 1965568 (0x001dfe00) > The system uptime is 2 days 21 hours 28 minutes 32 seconds > The system : started=warm start reloaded=by "reload" > > The configuration is attached. Any help is highly appreciated. > > Thanks, > Gaurav > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
