This new card might have the wrong boot code, but it won't come up, keeps cycling. I've tried to sync it with another WSM6 by putting the foul one in slot 2 after a good card comes up, but no luck. The card just keeps cycling.
I've also tried to get it to boot from tftp, but every time I type in the ip address, I hit enter and the card starts trying to reboot. Here's what I get: BOOT INFO: Become active CPU<http://www.tek-tips.com/viewthread.cfm?qid=1523949&page=1>module M2 BI Boot Code Version 07.06.01 Enter 'b' to go to boot monitor ... BOOT INFO: load from primary copy BOOT INFO: bootparam at 3fffffe0, mp_flash_size = 0ø BOOT INFO: RESET ANY master arbitrate : become primary arbitrator. BOOT INFO: Become active CPU module M2 BI Boot Code Version 07.06.01 Enter 'b' to go to boot monitor ... Going to bootmon I get: BOOT MONITOR> ip address 192.168.0.77/24 ý BOOT INFO: RESET ANY master arbitrate : become primary arbitrator. BOOT INFO: Become active CPU module M2 BI Boot Code Version 07.06.01 Hitting enter when I set the ip sends it cycling again. I'm sort of stuck. Any suggestions would be great. Thanks much for any suggestions at all.
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
