It's funny-- I removed the secondary and tried to upgrade the firmware to 9.5. Here's the sho fla oputput on that one, now:
ServerIronGT E-1#sho fla Active management module: Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4 Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 Compressed Pri Code size = 5246093, Version 09.5.02pTD4 (WXR09502p.bin) Compressed Sec Code size = 3934578, Version 09.4.00yTD2 (WXM09400y.bin) Maximum Code Image Size Supported: 6946304 (0x0069fe00) Boot Image size = 292752, Version 09.05.02 (m2b09502.bin) Used Configuration Flash Size=221, Max Configuration Flash Size=327680. WSM module slot 1 CPU 1: Code Flash Type: , Size: 0 * 0 = 0 Boot Flash Type: , Size: 0 * 0 = 0 Compressed Pri Code: size = 0 Version Compressed Sec Code: size = 0 Version Maximum Code Image Size Supported: 0 (0x00000000) Boot Image size = 0 Version Maximum Boot Image Size Supported: 0 (0x00000000) ServerIronGT E-1# Note that the flash got burnt on this one, too. Anyone got any suggestions? Thanks much. On Mon, Feb 23, 2009 at 11:37 AM, Jonas Frey <[email protected]> wrote: > Hi, > > i guess only thing you can do is hard reboot the box. > If you are unlucky the flash on the primary card has gone bad. Atleast > it reports it cant read the config nvram. > Even if the first card is dead you still have the secondary...and it > should boot from that one. Make sure you have a backup of your config > tho. > Also that firmware is quite ancient....might be a good idea to upgrade > to atleast 9.5. > > Regards, > Jonas > > On Mon, 2009-02-23 at 19:41, Chuck Ufarley wrote: > > My WSM6-1 card blanked out with a WSM CPU crash, and now the code > > won't reload on the WSM module. I'm afraid to restart it and find a > > brick. Below is the console output for the process. Every time I try > > to load on a new WSM code, the transfer only goes to the secondary > > management card. Also , the subsystem lights on the front only flash > > for the secondary mgt, though the output states that the primary is > > active. Removing the secondary card doesn't cause any shutdown. > > > > Help greatly appreciated. Here's the output: > > > > SLB-ServerIron#sho fla > > Active management module: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code size = 3869358, Version 09.4.00mTD2 > > (WXM09400m.bin) > > Compressed Sec Code size = 3934578, Version 09.4.00yTD2 > > (WXM09400y.bin) > > Maximum Code Image Size Supported: 7011840 (0x006afe00) > > Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin) > > INFO: empty config data in the primary area, try to read from backup > > INFO: empty config data in the backup area also > > Configuration Data Flash is empty. > > Used Configuration Flash Size=0, Max Configuration Flash Size=327680. > > > > Standby management module: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code size = 3869358, Version 09.4.00mTD2 > > (WXM09400m.bin) > > Compressed Sec Code size = 3934578, Version 09.4.00yTD2 > > (WXM09400y.bin) > > Maximum Code Image Size Supported: 7011840 (0x006afe00) > > Boot Image Version 07.06.54 (wsm-b54.bin) > > > > WSM module slot 1 CPU 1: > > Code Flash Type: AMD , Size: 0 * 0 = 0 > > Boot Flash Type: AMD , Size: 0 * 0 = 0 > > Compressed Pri Code: size = 0 Version > > Compressed Sec Code: size = 0 Version > > Maximum Code Image Size Supported: 0 (0x00000000) > > Boot Image size = 0 Version > > Maximum Boot Image Size Supported: 0 (0x00000000) > > > > WSM module slot 2 CPU 1: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code: size = 1632640 Version 09.4.00mTF2 > > Compressed Sec Code: size = 1632640 Version 09.4.00mTF2 > > Maximum Code Image Size Supported: 2096640 (0x001ffe00) > > Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin) > > Maximum Boot Image Size Supported: 458752 (0x00070000) > > SLB-ServerIron#sho fla > > Active management module: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code size = 3869358, Version 09.4.00mTD2 > > (WXM09400m.bin) > > Compressed Sec Code size = 3934578, Version 09.4.00yTD2 > > (WXM09400y.bin) > > Maximum Code Image Size Supported: 7011840 (0x006afe00) > > Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin) > > INFO: empty config data in the primary area, try to read from backup > > INFO: empty config data in the backup area also > > Configuration Data Flash is empty. > > Used Configuration Flash Size=0, Max Configuration Flash Size=327680. > > > > Standby management module: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code size = 3869358, Version 09.4.00mTD2 > > (WXM09400m.bin) > > Compressed Sec Code size = 3934578, Version 09.4.00yTD2 > > (WXM09400y.bin) > > Maximum Code Image Size Supported: 7011840 (0x006afe00) > > Boot Image Version 07.06.54 (wsm-b54.bin) > > > > WSM module slot 1 CPU 1: > > Code Flash Type: AMD , Size: 0 * 0 = 0 > > Boot Flash Type: AMD , Size: 0 * 0 = 0 > > Compressed Pri Code: size = 0 Version > > Compressed Sec Code: size = 0 Version > > Maximum Code Image Size Supported: 0 (0x00000000) > > Boot Image size = 0 Version > > Maximum Boot Image Size Supported: 0 (0x00000000) > > > > WSM module slot 2 CPU 1: > > Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304 > > Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288 > > Compressed Pri Code: size = 1632640 Version 09.4.00mTF2 > > Compressed Sec Code: size = 1632640 Version 09.4.00mTF2 > > Maximum Code Image Size Supported: 2096640 (0x001ffe00) > > Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin) > > Maximum Boot Image Size Supported: 458752 (0x00070000) > > SLB-ServerIron#sho ver > > SW: Version 09.4.00mTD2 Copyright (c) 1996-2003 Foundry Networks, > > Inc. > > Compiled on May 03 2006 at 20:38:33 labeled as WXM09400m > > (3869358 bytes) from Primary WXM09400m.bin > > HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist > > > ========================================================================== > > SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE > > Serial #: CH17061827 > > App CPU's in the process of coming up! > > 16384 KB BRAM, SMC version 5, BM version 21 > > > ========================================================================== > > SL 2: B0GMR WSM6 Management Module, SYSIF 2, M6, STANDBY > > Serial #: CH50050072 > > 0 MB SHM, 1 Application Processors > > 16384 KB BRAM, SMC version 5, BM version 21 > > SW: (1)09.4.00mTF2 > > > ========================================================================== > > SL 3: J-BxG2 JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC) > > Serial #: CX04050362 > > 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a > > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 8, version 0449 > > > ========================================================================== > > SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2 > > Serial #: CH05060646 > > 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a > > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449 > > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449 > > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449 > > 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449 > > > ========================================================================== > > Active management module: > > 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus > > 512 KB boot flash memory > > 16384 KB code flash memory > > 512 KB SRAM > > 512 MB DRAM > > Standby management module: > > 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus > > 512 KB boot flash memory > > 16384 KB code flash memory > > 512 KB SRAM > > 512 MB DRAM > > The system uptime is 55 minutes 40 seconds > > The system : started=cold start > > > > SLB-ServerIron#wsm copy tftp fla 192.168.0.35 wsp-b54.bin boot > > SLB-ServerIron#Programming WSM module flash at slot 2, please wait ... > > > > WSM module 2 flash operation done > > > > SLB-ServerIron# > > > > > > ______________________________________________________________________ > > _______________________________________________ > > foundry-nsp mailing list > > [email protected] > > http://puck.nether.net/mailman/listinfo/foundry-nsp > > >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
