ip router-id added. Looks like no any changes "ip icmp redirect" Looks like this is defauls because command is not shown in config. but if i add no ip icmp redirect, then I see the command in show run.
2009/3/10 Jeroen Wunnink <[email protected]> > Not sure where I heared this before, but did you try setting a 'ip > router-id <ip address>' ? > I recall somewhere that setting this solves several CPU related utilization > problems on the bigiron. > > > Alexey Kouznetsov wrote: > >> >> Something like 70 Mbit untill visible on TV losts coming (at this point we >> have > 95% CPU load). as long as packet size here ~1300 bytes, then it less >> then 10K PPS. >> Here are some VE interfaces assigned to user's vlans. Each VE interface >> have only 1 IP address assigned >> like >> ----- >> interface ve 1 >> ip address 10.10.31.2/24 <http://10.10.31.2/24> >> ip pim-sparse >> ----- >> and >> ----- >> interface ve 11 >> ip address a.b.c.110/30 >> ip pim-sparse >> ip pim border >> management-ip-disable >> ----- >> for interfase where Mcast come from. >> /Alexey >> > > -- > > Met vriendelijke groet, > > Jeroen Wunnink, > EasyHosting B.V. Systeembeheerder > [email protected] > > telefoon:+31 (035) 6285455 Postbus 48 > fax: +31 (035) 6838242 3755 ZG Eemnes > > http://www.easyhosting.nl > http://www.easycolocate.nl > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
