Do a "show run" and double check to see if you are booting off the image on the card. You should see something like this: lp boot system flash secondary 1 lp boot system flash secondary 2 lp boot system flash secondary 3 lp boot system flash secondary 4 lp boot system flash secondary 5
If the slot you are having issues with is still in interactive mode make sure you go into conf t and change it. I've had issues where I've had to manually upgrade the card. You can find the how-to in the Foundry documentation on their website. Daniel Faubel Net2EZ - Managed Data Centers Network Manager 310-426-9933 x1 NOC 310-426-9933 x110 Direct [email protected] ________________________________ From: [email protected] on behalf of Chuck Ufarley Sent: Mon 8/3/2009 2:17 PM To: [email protected] Subject: [f-nsp] Line Cards not Booting on NI-MLX-4 Hi all-- I've got a couple of NI-MLX-1Gx20-SFPs that I'm trying to bring up on an NI-MLX-MR running 4.00ca, and I can't get the cards to boot. They keep looping through a "CARD_STATE_BOOT" "CARD_STATE_SW_LOADED " "CARD_STATE_SYNC_FID" loop, but won't come up active. I can't update the lp files unless the card comes up. I've tried this: Config t lp boot system interactive [slot#] exit wr mem Power-off lp [slot#] Power-on lp [slot#] lp boot system mp primary [slot#] and the lp images load from the mp, but they don't seem to stick, because the line card doesn't go active. Do I need to issue a "no lp boot system interactive" + new "wr mem" + reload command to get it up and running? It doesn't seem to work. Am I missing something obvious. Help is extremely appreciated. I'm a little stumped right now. Thanks. --Chuck
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
