Ok, so my understanding is that the anycast IP is with the host address set to all 0s. I am not using that. I am using the 0 subnet but using eui-64 to set the host bits.
I don't understand what you mean by : you are using anycast address The addresses I was trying to use wree: 2620:0:5100:0:21b:edff:feae:bc00 and 2620:0:5150:0:21b:edff:feae:de00 and I can not ping between them I changed the typo in the subnet prefix and that has fixed the problem, I can now ping between them: tel...@sjc-bgw-02#ping ipv6 2620:0:5100:0:21b:edff:feae:bc00 Sending 1, 16-byte ICMPv6 Echo to 2620:0:5100:0:21b:edff:feae:bc00 timeout 5000 msec, Hop Limit 0 Type Control-c to abort Reply from 2620:0:5100:0:21b:edff:feae:bc00: bytes=16 time<1ms Hop Limit=64 Success rate is 100 percent (1/1), round-trip min/avg/max=0/0/0 ms. On Sun, Apr 11, 2010 at 4:00 PM, George B. <[email protected]> wrote: > Hmm, ok, so I was given the following block from ARIN: > > 2620:0000:5100::/44 which should give me 2620:0:5100:: through > 2620:0:510f:: by my thinking. So I want to use the first /64 which is > 2620:0:5100:0000 > > > > > > > On Sun, Apr 11, 2010 at 3:54 PM, Ryan DeBerry <[email protected]> wrote: > >> You realize you are using anycast addresses? >> >> >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
