Brian, you should be able to recover the module by setting it to boot interactively. More than likely that line cards image got corrupted or something during the upgrade. To do this, turn the slot off:
lp power-off <slot number> set the module to boot into interactive mode: lp boot system interactive <x> The module should come back and stay in interactive mode, where you can upgrade the images one at a time. Don't use the unified image, use the individual LP boot and images. Hope that helps. Mike On Tue, Jun 8, 2010 at 10:31 AM, Brian Stadtmiller <[email protected] > wrote: > We upgraded an RX-8 to the latest firmware and all is fine except one > module, > > A RX-BI4XG just reloads itself in a loop afterwards. Anyone know a way to > break it > > Out of the loop and make it behave? > > > > Brian Stadtmiller > > Terabit Systems > > 2565 3rd Street #334 > > San Francisco, CA 94107 > > 415-230-4353 main > > 415-652-2888 cell > > AIM: bstadtmiller9609 > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp >
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
