Grady,

Do you have an underlying IGP that you're running for the LDP? (ISIS or OSPF)? I'm thinking your LDP is just using the connected routes between the MLXs and when you fail a link, it has no IP route between them so it doesn't have a path. The BGP will be used to transfer customer routes between PEs... if the MLXs are simply P (core) devices and not facing customers, then there is no need for BGP on them (unless you're using BGP for the IGP, but I don't like the hold-down time for it to react to a link/route failure).

-Adam

--
Adam E Barratt
Project Engineer
SOCKET
(573) 817-0000 ext. 223
[email protected]
1-800-SOCKET-3  www.socket.net



Message: 4
Date: Mon, 28 Jun 2010 08:36:21 -0500
From: Grady Neely<[email protected]>
To: foundry-nsp<[email protected]>
Subject: [f-nsp] 3-node MPLS with MLXs
Message-ID:<[email protected]>
Content-Type: text/plain; charset=us-ascii

Hi all,

I have 3 MLX nodes connected in a ring configuration via 10gig links, call them 
R1, R2, R3.  I also have MPLS up and running via BGP between the three.

All works well as long as all the phy links are up.  But if I fail one of the 
10gig links, i.e. the link between R2 and R3, the MPLS tunnel between them goes 
down and does not reroute around the other side of the ring, via R1.  Is this 
normal?

I am new to MPLS, but being a routed protocol, I was hoping it would see the 
route along R1 and re-establish the MPLS tunnel.

Here are the MPLS configs of each router:

R1 (10.27.250.1)

router bgp
  local-as 1027
  neighbor 10.27.250.2 remote-as 1027
  neighbor 10.27.250.2 update-source loopback 1
  neighbor 10.27.250.3 remote-as 1027
  neighbor 10.27.250.3 update-source loopback 1

  address-family ipv4 unicast
  redistribute connected
  redistribute static
  redistribute ospf match internal
  redistribute ospf match external2
  exit-address-family

  address-family ipv4 multicast
  exit-address-family

  address-family ipv6 unicast
  exit-address-family

  address-family ipv6 multicast
  exit-address-family

  address-family vpnv4 unicast
  exit-address-family

  address-family l2vpn vpls
  neighbor 10.27.250.2 activate
  neighbor 10.27.250.2 send-community extended
  neighbor 10.27.250.3 activate
  neighbor 10.27.250.3 send-community extended
  exit-address-family
end of BGP configuration

router mpls


   mpls-interface ve8
   ldp-enable

   mpls-interface ve9
   ldp-enable

   mpls-interface ve10
   ldp-enable

  vpls MGMT 3
   auto-discovery
   vlan 3
    tagged ethe 1/1 eth 1/4 eth 1/7


R2 (10.27.250.2):

router bgp
  local-as 1027
  neighbor 10.27.250.1 remote-as 1027
  neighbor 10.27.250.1 update-source loopback 1
  neighbor 10.27.250.3 remote-as 1027
  neighbor 10.27.250.3 update-source loopback 1

  address-family ipv4 unicast
  redistribute connected
  exit-address-family

  address-family ipv4 multicast
  exit-address-family

  address-family ipv6 unicast
  exit-address-family

  address-family ipv6 multicast
  exit-address-family

  address-family vpnv4 unicast
  exit-address-family

  address-family l2vpn vpls
  neighbor 10.27.250.1 activate
  neighbor 10.27.250.1 send-community extended
  neighbor 10.27.250.3 activate
  neighbor 10.27.250.3 send-community extended
  exit-address-family
end of BGP configuration

router mpls


   mpls-interface ve3
   ldp-enable

   mpls-interface ve4
   ldp-enable

  vpls MGMT 3
   auto-discovery
   vlan 3
    tagged ethe 4/3 to 4/5 ethe 4/7 ethe 4/13 ethe 4/19

R3 (10.27.250.3):

router bgp
  local-as 1027
  neighbor 10.27.250.1 remote-as 1027
  neighbor 10.27.250.1 update-source loopback 1
  neighbor 10.27.250.2 remote-as 1027
  neighbor 10.27.250.2 update-source loopback 1

  address-family ipv4 unicast
  redistribute connected
  exit-address-family

  address-family ipv4 multicast
  exit-address-family

  address-family ipv6 unicast
  exit-address-family

  address-family ipv6 multicast
  exit-address-family

  address-family vpnv4 unicast
  exit-address-family

  address-family l2vpn vpls
  neighbor 10.27.250.1 activate
  neighbor 10.27.250.1 send-community extended
  neighbor 10.27.250.2 activate
  neighbor 10.27.250.2 send-community extended
  exit-address-family
end of BGP configuration


router mpls


   mpls-interface ve2
   ldp-enable

   mpls-interface ve3
   ldp-enable

  vpls MGMT 3
   auto-discovery
   vlan 3
    tagged ethe 4/1 to 4/4 ethe 4/7 ethe 4/13 ethe 4/19


------------------------------

_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

End of foundry-nsp Digest, Vol 89, Issue 22
*******************************************


_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to