Hello colleagues, after upgrading from 08.0.01u to 08.0.01v we are suffering from a problem with the link-keepalive-feature on bigirons: We can no longer activate link-keepalive on ports that have tagged vlans configured.
The error seems to be specific to ports 18 to 24 on a fe-tx-module (all of the ports, some of them or only a single one) only. Following error message occur while trying to assign link-keepalive to a port when a port within the range of 18-24 is in tagged mode in a vlan: Error: "link-keepalive and trunk threshold cannot be enabled in the same interface". As we are not using any trunks the message doesn't really make sense. If foundry is referring to a port with tagged vlans on it as "trunk"? What's a trunk threshold anyway? I didn't configure that feature.. The first occurrence was after updating the firmware from 08.0.01u to 08.0.01v - before everything was fine and I could use link-keepalive on tagged ports. Has anyone else seen the same error? Gunther _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
