It's safe (Unlike some of the mac debug commands). You might need to redirect the debug messages to the telnet or ssh session you are using if you are not directly connected on the console port.
Best regards Jan Pedersen Senior Network Specialist D: +45 7730 2932 M: +45 2550 7321 -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Youssef Ghorbal Sent: 4. oktober 2010 15:04 To: foundry-nsp Subject: Re: [f-nsp] [MLX-16] CAM lookup very slow On Mon, Oct 4, 2010 at 1:50 PM, Niels Bakker <[email protected]> wrote: > * [email protected] (Youssef Ghorbal) [Mon 04 Oct 2010, 13:16 CEST]: >> >> On Mon, Oct 4, 2010 at 12:02 PM, Niels Bakker >> <[email protected]> wrote: >>> >>> Yes, IronWare is quite monolithic. Try looking at what packets are >>> traversing this linecard's CPU. >> >> How can I "look" at what packets are traversion this Linecard's CPU ? > > debug packet capture I was'nt aware of this command. Is it "safe" to run it on loaded equipement ? or is it as a simple "tcpdump" on an *NIX machine ? I was always looking for a packet capture facility... Youssef Ghorbal _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
