Hi list, Turned out that when you add VSRP to a MRP controlled VLAN, VSRP takes over all ports including the MRP ports, so MRP will get disabled. You have to 'no include-ports' the MRP ports and re-enter the MRP ring-interfaces afterwards, then it's working fine.
Jorik Jonker Special Projects, Netherlands [email protected]<mailto:[email protected]> +31 53 434 0570 TEL +31 53 436 3098 FAX KvK: 06092246 EQUINIX From: [email protected] [mailto:[email protected]] On Behalf Of Jorik Jonker Sent: donderdag 18 november 2010 16:30 To: [email protected] Subject: [f-nsp] MRP + VSRP Hi all, The other day I was playing around a little bit, and tried to create a L2 redundancy structure using MRP and VSRP. In essence I'd like to create a MRP ring over 4 NetIron switches, and connect a fifth box, some router to two of the four switches. In order to provide a redundant connection between the switching platform and the router I'd like to use VSRP, which according to the VSRP-chapter in the NetIron config guide (5.1.00, sub-chapter "VSRP and Foundry MRP signaling", figure 143-145) should be a piece of cake. I created a VLAN tagged across the four switches, gave it a MRP ring, created a topology group, created a second VLAN (since this ring is usable for other stuff as well), and tried to put VSRP into that VLAN, which failed: xmr0(config-vlan-2000)#vsrp vrid 100 error - vlan VLAN: 2000 is member of topology group. Ok, so topology-groups and VSRP are not compatible in that way. I tried to bless the MRP control VLAN with VSRP, which was allowed by the CLI, but had different side effects: vlan 1000 name ring untagged ethe 4/20 tagged ethe 4/1 to 4/2 metro-ring 1 master enable vsrp vrid 1 backup priority 250 enable xmr0(config-vlan-2000)#sh metro Metro Ring 1 - VLAN Type REGULAR ============== Ring State Ring Master Topo Hello Prefwing id role vlan group time(ms) time(ms) 1 disabled master 1000 not conf 100 300 Ring interfaces Interface role Interface state interface type Not configured Not configured So, VSRP disabled MRP operation. Can anyone hint me how to get the situation like in figures 143-145 of the 5.1.00 config guide (PDF page 886 or 714)? Best regards, Jorik Jonker Special Projects, Netherlands [email protected]<mailto:[email protected]> +31 53 434 0570 TEL +31 53 436 3098 FAX EQUINIX Postbus 673 7500 AR Enschede KvK: 06092246 This email is from Equinix Europe Limited or one of its associated/subsidiary companies. This email, and any files transmitted with it, contains information which is confidential, may be legally privileged and is solely for the use of the intended recipient. If you have received this email in error, please notify the sender and delete this email immediately. Equinix Europe Limited. Registered Office: Quadrant House, 4 Thomas More Square, London E1W 1YW. Registered in England and Wales No. 6293383.
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
