Ok so I have found the ip icmp burst-normal [value] burst-max [value] lockup [value]
ip tcp burst-normal [value] burst-max [value] lockup [value] Can someone send me values that are acceptable in a production environment? It seems both commands above are only for connections directed at the device, so they really wouldn't effect transiting traffic. Am I correct? Brendan Mannella On Nov 25, 2010, at 5:13 PM, Nuno Vieira - nfsi telecom <[email protected]> wrote: > You have updated documentation on http://kp.foundrynet.com/ > > regards, > --nvieira > > ----- Original Message ----- >> We purchased a couple MLX-e (XMR) that act as border/core routers to >> be used in a hosting environment. I have googled and only came up with >> a doc from '03. I have done most of the basic stuff, but wondered if >> someone could point me to a newer doc or give me config examples. >> >> I am looking for something similar to RE-Protect on Junos. Things like >> rate-limiting icmp headed towards the router itself and other best >> practices, aswell as basic DOS protection. No icmp redirects, etc. >> >> Thanks in Advance >> >> Brendan >> _______________________________________________ >> foundry-nsp mailing list >> [email protected] >> http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
