* [email protected] (Jorik Jonker) [Fri 08 Apr 2011, 10:53 CEST]:
Is this some protocol we should have turned off, or could it be that
a part of the switch is losing itself?
Looks like either the receiver or the sender is inserting two bytes
with all bits set at the beginning of some frames. Let me guess: this
concerns port 1/8 on your XMR? That's not legal Ethernet, though, as
your wireshark dump already shows (frame length of 1).
I've not seen this particular failure mode myself but I hope that
doesn't say too much. :) I'd try switching ports and if possible
linecards on both sides, see if the problem goes away after doing one
action at a time, and send the broken hardware back to the vendor
after isolating.
-- Niels.
--
_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp
