hi, i would like to enforce a 100mbit (as sharp as possible) bandwidth limit on a fesx 424 running firmware 04.2.00cT3e3. (upgrading the firmware is an option but i would like to avoid the additional work if possible).
setup: 1 vlan with 1 untagged port: > PORT-VLAN 163, Name k000639, Priority level0, Spanning tree Off > Untagged Ports: 4 > Tagged Ports: None > Uplink Ports: None > DualMode Ports: None port 4 is a cisco compatible mm sfp: 1G M-SX(SFP)/CISCO-FINISAR there is one ve associated with this vlan: > interface ve 163 > ip address 93.189.29.25/29 > ip ospf area 0.0.0.0 > ip ospf passive > ! i want to enforce a sharp 100mbit bandwidth limit for this port on both in- and egress. i tried both using the "rate-limit" option ad interface level as well as a traffic policy: > # traffic-policy 100mbit rate-limit fixed 100000 exceed-action drop count > # access-list 101 permit ip any any traffic-policy 100mbit > # interface ve 163 > # ip access-group 101 in but somehow, i fail to find the correct settings in correctly applying the limit. does anyone of you have a working rate-limiting setup and can help me out on this? thanks, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
