AFAIK IPv6 is still on track for the next major FCX software release coming out in the next few months.
FESX4xx won't ever get IPv6 routing as the "4" in FESX4 stands for hardware-based IPv4 routing. If you need IPv6 routing in the FESX, you must use a FESX6 box. (Or any of the other v6-capable platforms like NetIron, BigIron, and FastIron 6-series). I believe FESX4xx "Switch" code can be managed over IPv6, but it's not routing v6, you're just managing it over v6. I do not believe there are any plans for software-based v6 routing on FESX4xx platforms. Jared Valentine [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Raoul Bhatia [IPAX] Sent: Tuesday, October 04, 2011 5:51 AM To: [email protected] Subject: Re: [f-nsp] IPv6 on F-CX On 2011-10-04 13:19, Jethro R Binks wrote: > Hi, > > A few months ago there was mention that IPv6 routing would be supported on > the FCX "with the next major software release": > > http://puck.nether.net/pipermail/foundry-nsp/2011-April/003123.html what about fesx 4xx switches? will they receive an upgrade too? (of course, i know about fesx6xx switches and am willing to take a performance penalty) thanks, raoul -- ____________________________________________________________________ DI (FH) Raoul Bhatia M.Sc. email. [email protected] Technischer Leiter IPAX - Aloy Bhatia Hava OEG web. http://www.ipax.at Barawitzkagasse 10/2/2/11 email. [email protected] 1190 Wien tel. +43 1 3670030 FN 277995t HG Wien fax. +43 1 3670030 15 ____________________________________________________________________ _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
