I'm guessing that when you create a VLAN group, you are limited to performing operations against the entire VLAN group. Ie: you tagged e 1 to 4 in the VLAN group.
An untagged port is something that can only be done on a single VLAN. Chances are you'll have to remove vlan 303 from the vlan group, create it individually, and then configure the ports appropriately (tagged and untagged). Jared Valentine [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Randy McAnally Sent: Thursday, October 13, 2011 10:26 AM To: Randy McAnally; Maarten Bollen | Atrato IP Networks Cc: [email protected] Subject: Re: [f-nsp] FastIron: many vlans On Thu, 6 Oct 2011 12:03:14 -0400, Randy McAnally wrote > On Thu, 6 Oct 2011 17:11:36 +0200, Maarten Bollen | Atrato IP > Networks wrote > > how about: > > vlan-group 1 vlan 200 to 400 > > tag e 1 to 4 > > > > Confirmed on TurboIron, not sure if it is an fastiron command. Followup for the foundry experts... now that we have vlan group for the trunk port, how to add an untagged port? telnet@fesx(config)#vlan 303 error - L2 vlan 303 was already configured in vlan group 1 ~Randy _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
