If the optic doesn't work, then clean the patch cable, then try swapping for a new patch cable, then try a different port on the TI24X.
Jared Valentine [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Matt Kassawara Sent: Thursday, November 03, 2011 7:28 AM To: Drew Weaver Cc: [email protected] Subject: Re: [f-nsp] TurboIron CRC/Input errors I'd try swapping the optic. On Tue, Nov 1, 2011 at 3:11 PM, Drew Weaver <[email protected]> wrote: > Howdy, > > > > While troubleshooting another problem I noticed that the crc/input error > counter on one of our Turboiron 24s increments a few every couple of > seconds: > > > > The amount of crc/input errors doesn't seem to scale up with the amount of > traffic on the interface and the total number if tiny compared to the number > of packets: > > > > Received 156698568 broadcasts, 108451187 multicasts, 3166991325637 unicasts > > 131804 input errors, 131801 CRC, 0 frame, 0 ignored > > 0 runts, 3 giants > > > > Does anyone know if there is any definitive way of knowing what is causing > this? > > thanks, > > Drew > > > > _______________________________________________ > foundry-nsp mailing list > [email protected] > http://puck.nether.net/mailman/listinfo/foundry-nsp > _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
