Hello Community, I have an MLXe-4 (IronWare : Version 5.3.0cT163) with two MR2-X modules that experienced an MR switchover for no apparent reason :
[email protected]#sh module Module Status Ports Starting MAC M1 (left): BR-MLX-MR2-X Management Module Standby (Ready State) M2 (right): BR-MLX-MR2-X Management Module Active [email protected]#sh redundancy === MP Redundancy Settings === Default Active Slot = M1 (left) Running-Config Sync Period = 7 seconds === MP Redundancy Statistics === Current Active Session: Active Slot = M2 (right), Standby Slot = M1 (left) (Ready State), Switchover Cause = No Switchover Start Time = 00:17:45 GMT+00 Thu Sep 20 2012 Previous Active Session #1: Active Slot = M1 (left), Standby Slot = M2 (right), Switchover Cause = Active Rebooted Start Time = 09:43:52 GMT+00 Fri Sep 14 2012 , End Time = 00:17:45 GMT+00 Thu Sep 20 2012 This was confirmed by logs : Sep 20 00:17:59:A:System: Management module at slot M2 state changed from standby to active due to Active reboot I opened a ticket with Brocade support but wanted to know if anyone experienced the same problem out there ? Trying to understand here as the given reason doesn't give any kind of a clue. Regards. -- Youssef BENGELLOUN-ZAHR
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
