> For a resilient solution recently I've had two firewalls in two DC's connected > to two separate VPLS instances. This is through an XMR core running 5.4E > > I've created a TE LSP that doesn't follow the shorted path unlike the primary > LSP. I've then set up the second VPLS to specifically use the second LSP. > > I only want to use this LSP for this VPLS. I don't want any other traffic > using > this LSP. > > I've set the metric for the LSP to 50000, however other VPLS/VLL instances > are still using this path. From the config guide it seems that only BGP and > IGPs take note of the metric of the LSP. How is it possible to ensure that a > VPLS/VLL will only use this LSP if I specifically request it to do so? > > Thanks > Darren > http://www.mellowd.co.uk/ccie >
You can specify an LSP by name in a VPLS by using: vpls-peer <ip> lsp <lsp> from within your vpls configuration. VLLs on the other hand, you'll need a software upgrade (not sure it's available yet)? _______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
