Hi all- We've got a BR-MLX-1GFX24-X in an MLXe chassis running 5.600b, and it's saying it's got an invalid board class (info below). I know you can rconsole into a working line card and set the board class with the "settype [decimal]" command. Looks like this one has the wrong decimal. Unfortunately I can't boot the card into Interactive Mode, because it's the wrong board class, and isn't recognized by the management/chassis.
So. Anyone have any experience resurrecting MLX/XMR cards that have this problem? Or am I wasting your time with a Brocade TAC issue? arn:Unrecognized card type in slot 2.Board class: 0x02,Version: 5.6.0 This module may require a later version of code, please refer to release notes. Slot 2 will not be powered on. system memory: 4294967295, available 3937189888 Start init runconfig from start config Load config data from flash memory... FID manager initialized ... Warn:Unrecognized card type in slot 2.Board class: 0x02,Version: 5.6.0 This module may require a later version of code, please refer to release notes. Error:rw_get_power_on_mask: Can't get power usage for slot 2, fail to bring it u p Slot 2 is already powered off. Thanks much for any input. Dave Peters, Technical Support 415 795 2463 | AIM: terabitdave Terabit Systems LLC, 2565 3rd St #218, San Francisco, CA 94107 [Description: Description: TB-logo-new-150x46]<http://www.terabitsystems.com/>[Description: Description: twitter_centered]<https://twitter.com/TerabitSystems>[Description: Description: linkedin_centered]<http://www.linkedin.com/company/1098784?trk=tyah>
<<inline: image001.jpg>>
<<inline: image002.png>>
<<inline: image003.png>>
_______________________________________________ foundry-nsp mailing list [email protected] http://puck.nether.net/mailman/listinfo/foundry-nsp
