My own research on MLX support for uRPF made me very disappointed:

 

Note this from the release notes:

-          If a default route is present on the router, loose mode will permit 
all traffic

-          RPF can only be configured at the physical port level. It should not 
be configured on virtual interfaces on the Brocade MLX series and Brocade 
NetIron XMR.

o   Brocade MLX series and Brocade NetIron XMR devices do not support uRPF for 
VE interfaces.

Also RPF is not compatible with this CAM profile: “ipv4-ipv6”  I think we’re 
using that one.

https://tnotez.files.wordpress.com/2013/05/netironunified_05400a_configguide.pdf

 

Frank

 

From: foundry-nsp [mailto:[email protected]] On Behalf Of 
Michael Gehrmann
Sent: Wednesday, July 13, 2016 12:11 AM
To: [email protected]
Subject: [f-nsp] MLX and uRPF for RTBH

 

Hi All,

 

Wondering if anyone has used the uRPF feature on MLX to have the source address 
of traffic matched to null0 routes?

 

My reading so far has lead me to a config like this:

 

reverse-path-check
urpf-exclude-default
!
interface eth1/1
rpf-mode loose log
!

 

Example routes look like this:

 

device#sh ip route 2.144.0.0/24 <http://2.144.0.0/24> 

        Destination        Gateway         Port          Cost          Type 
Uptime src-vrf

1       2.144.0.0/24 <http://2.144.0.0/24>        DIRECT          drop          
20/0          Be   3d1h   - 

 

My next step is the lab.

 

Cheers

-- 

Michael Gehrmann

 

_______________________________________________
foundry-nsp mailing list
[email protected]
http://puck.nether.net/mailman/listinfo/foundry-nsp

Reply via email to